The TPS57060QDGQRQ1 device is a 60V 0.5A step-down regulator with integrated high-side MOSFET. Current mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skipping mode reduces the no-load regulated output supply current to 116µA. Shutdown current drops to 1.3µA when the enable pin is in a low state.

Its undervoltage lockout voltage is internally set to 2.5V, but can be raised with an enable pin. The ramp during output voltage startup is controlled by the soft-start pin, which can also be used to configure timing and tracking. An open-drain power-good signal indicates that the output is within 92% to 109% of its nominal voltage.

Product parameters:

Product Type: Switching Regulators

RoHS: Details

Installation style: SMD/SMT

Package / Enclosure: MSOP-PowerPad-10

Topology: Buck

Output voltage: 800mV to 58V

Output current: 500mA

Number of outputs: 1 Output

Input voltage (min): 3.5 V

Input voltage (maximum): 60 V

Quiescent current: 116 uA

Switching frequency: 581kHz

Minimum working temperature: - 40 C

Maximum working temperature: + 125 C

Qualification: AEC-Q100

Series: TPS57060-Q1

Package: Reel

Input Voltage: 3.5V to 60V

Humidity Sensitivity: Yes

Working power supply current: 116 uA

Product: Voltage Regulators

Product Type: Switching Voltage Regulators

Subcategory: PMIC - Power Management ICs

Type: Voltage Converter

Unit weight: 23.500 mg