Shenzhen Meiyuxin Technology Co., Ltd. [High-performance MCU agent] STM32H753ZIT6 ARM microcontroller - MCU High-performance & DSP DP-FPU, Arm Cortex-M7 MCU 2MBytes of Flash 1MB RAM, 480 M! ! !

Product Description:

STM32H753ZIT6 devices support a full set of DSPinstructions and a memory protection unit (MPU) to enhance application security.

STM32H753ZIT6 devices incorporate high-speed embedded memories with a dual-bank Flash memory of 2 Mbytes, up to 1 Mbyte of RAM (including 192 Kbytes of TCM RAM, up to 864 Kbytes of user SRAM and 4 Kbytes of backup SRAM), as well as an extensive range of enhanced I/Os and peripherals connected to APB buses, AHB buses, 2x32-bit multi-AHB bus matrix and a multi layer AXI interconnect supporting internal and external memory access.

STM32H753ZIT6 All the devices offer three ADCs, two DACs, two ultra-low power comparators, a low-power RTC, a high-resolution timer, 12 general-purpose 16-bit timers, two PWM timers for motor control, five low-power timers, a true random number generator (RNG), and a cryptographic acceleration cell. The devices support four digital filters for external sigma-delta modulators (DFSDM). They also feature standard and advanced communication interfaces.

• Standard peripherals

– Four I2Cs

– Four USARTs, four UARTs and one LPUART

– Six SPIs, three I2Ss in Half-duplex mode. To achieve audio class accuracy, the I2S

peripherals can be clocked by a dedicated internal audio PLL or by an external

clock to allow synchronization.

– Four SAI serial audio interfaces

– One SPDIFRX interface

– One SWPMI (Single Wire Protocol Master Interface)

– Management Data Input/Output (MDIO) slaves

– Two SDMMC interfaces

– A USB OTG full-speed and a USB OTG high-speed interface with full-speed

capability (with the ULPI)

– One FDCAN plus one TT-FDCAN interface

– An Ethernet interface

– Chrom-ART Accelerator™

– HDMI-CEC

• Advanced peripherals including

– A flexible memory control (FMC) interface

– A Quad-SPI Flash memory interface

– A camera interface for CMOS sensors

– An LCD-TFT display controller

– A JPEG hardware compressor/decompressor

STM32H753ZIT6devices operate in the –40 to +85 °C temperature range from a 1.62 to 3.6 V power supply. The supply voltage can drop down to 1.62 V by using an external power supervisor and connecting the PDR_ON pin to VSS. Otherwise the supply voltage must stay above 1.71 V with the embedded power voltage detector enabled. Dedicated supply inputs for USB (OTG_FS and OTG_HS) are available on all packages except LQFP100 to allow a greater power supply choice.A comprehensive set of power-saving modes allows the design of low-power applications.

STM32H753ZIT6 devices are offered in 8 packages ranging from 100 pins to 240 pins/balls. The set of included peripherals changes with the device chosen. These features make：STM32H753ZIT6 microcontrollers suitable for a wide range of applications:

• Motor drive and application control

• Medical equipment

• Industrial applications: PLC, inverters, circuit breakers

• Printers, and scanners

• Alarm systems, video intercom, and HVAC

• Home audio appliances

• Mobile applications, Internet of Things

• Wearable devices: smart watches.