The ADG708BRUZ-REEL7 is a low voltage, CMOS analog multiplexer including eight single and four differential channels, respectively. The ADG708 switches one of the eight inputs (S1 to S8) to a common output, D, as determined by the 3-bit binary address lines A0, A1, and A2. The ADG709 switches one of the four differential inputs to a common differential output by 2-bit binary address lines A0 and A1.

The EN input on both devices of the ADG708BRUZ is used to enable or disable the device. When disabled, all channels will be closed. Low power consumption and an operating supply range of 1.8 V to 5.5 V make the ADG708/ADG709 ideal for battery-operated portable instruments. All channels show the opening-before-closing switching action to prevent momentary short circuit when switching channels.

ADG708BRUZ-REEL7 These switches are designed in an enhanced sub-micron process to provide low power consumption yet provide high switching speed, very low on-resistance and leakage current.

Product Specifications:

Product Category: Multiplexer Switch ICs

RoHS: Details

Series: ADG708

Product: Multiplexers

Installation style: SMD/SMT

Package/Case: TSSOP-16

Number of channels: 8 Channel

Configuration: 1 x 8:1

Supply Voltage - Min: 1.8 V

Supply Voltage - Maximum: 5.5 V

Minimum dual supply voltage: +/- 2.25 V

Maximum dual supply voltage: +/- 2.75 V

On Resistance—Maximum: 4.5 Ohms

Run Time—Max: 14 ns

Idle Time—Max: 7 ns

Minimum operating temperature: - 40 C

Maximum operating temperature: + 125 C

Package: Reel

Bandwidth: 55 MHz

Height: 1.05 mm

Length: 5 mm

Off Isolation - Typical: 80 dB

Operating supply voltage: 5 V

Pd-Power Dissipation: 5 uW

Product Type: Multiplexer Switch ICs

Subcategory: Switch ICs

Width: 4.4 mm

Unit weight: 173 mg