Shenzhen Meiyuxin Technology Co., Ltd. [supply microcontroller chips] sells STM32H757IIT6 ARM microcontroller - MCU High-performance Arm Cortex-M7 + Cortex-M4 MCU quality assurance! ! !

STM32H757IIT6 product description:

The STM32H757IIT6 device is based on the high-performance Arm® Cortex®-M7 and Cortex®-M4 32-bit RISC cores. The Cortex®-M7 core runs at up to 480 MHz, while the Cortex®-M4 core runs at up to 240 MHz. Both cores feature a floating point unit (FPU) supporting Arm® single and double precision (Cortex®-M7 core) operations and conversions (IEEE754 compliant), including a full set of DSP instructions and a memory protection unit (MPU) to enhance applications security.

STM32H757IIT6 devices contain high-speed embedded memory with dual banks of 2 MB of RAM, up to 1 Mbyte of RAM (including 192 KB of TCM RAM, up to 864 KB of user SRAM and 4 KB of backup SRAM), and a wide range of connections to Enhanced I/O and Peripheral Bus Matrix for APB bus, AHB bus, 2x32-bit multi-AHB and multilayer AXI interconnect access to support internal and external memory.

All STM32H757IIT6 devices provide three ADCs, two DACs, two ultra-low-power comparators, one low-power RTC, one high-resolution timer, twelve general-purpose 16-bit timers, two motor PWM timers control, five low-power timers, a true random number generator (RNG), and a cryptographic acceleration cell. These devices support four digital filters (DFSDM) for the external sigma-delta modulator. They also have standard and advanced communication interfaces.

• Standard peripherals

– Four I2C

– Four USARTs, four UARTs and one LPUART

– Six SPIs, three I2S in half-duplex mode. For audio-grade accuracy, the I2S peripherals can be clocked by a dedicated internal audio PLL or by an external clock to allow synchronization.

– Four SAI serial audio interfaces

– One SPDIFRX interface

– One SWPMI (Single Wire Protocol Master Interface)

– Management data input/output (MDIO) slave

– Two SDMMC interfaces

– One USB OTG Full Speed and one USB OTG High Speed interface with Full Speed capability (with ULPI)

– One FDCAN plus one TT-FDCAN interface

– Ethernet interface

– Chrom-ART Accelerator™

– HDMI-CEC

• Advanced peripherals include

– Flexible Memory Control (FMC) interface

– One Quad-SPI flash interface

– Camera interface for CMOS sensors

– LCD-TFT display controller

– JPEG hardware compressor/decompressor

– DSI host interface.

The STM32H757IIT6 devices operate from a –40 to +85 °C temperature range from a 1.62 to 3.6 V supply. The supply voltage can be reduced to a 1.62 V monitor by using an external power supply (see Section 3.5.2: Power supply monitor) and connecting the PDR_ON pin to VSS. Otherwise the supply voltage must remain above 1.71 V, the embedded power supply enables the voltage detector.

All packages provide USB dedicated power inputs (OTG_FS and OTG_HS) to allow greater power selection. A comprehensive set of power-saving modes allows the design of low-power applications. The STM32H757IIT6 device is available in 5 packages ranging from 156 pins to 240 pins/ball. The set of included peripherals varies with the device selected. These features make the STM32H757IIT6 microcontroller suitable for a wide range of applications:

• Motor drive and application control

• medical equipment

• Industrial applications: PLCs, inverters, circuit breakers

• Printers and scanners

• Alarm system, video intercom and HVAC

• Home audio equipment

• Mobile applications, Internet of Things

• Wearables: smart watches