Shenzhen Meiyuxin Technology Co., Ltd. [distributing Microchip MCU] PIC32CM5164JH01064-I/PT Arm® Cortex®-M0+ based MCU Quality Assurance New original! ! !

PIC32CM5164JH01064-I/PT product description:

The PIC32CM5164JH01064-I/PT JH family of 5-V Cortex M0+ devices is designed for applications operating in noisy environments such as automotive and industrial. These products feature hardware for functional safety, including ECC and mBIST with fault injection and features for secure boot, and can be paired with safety ICs for safety applications. The PIC32CM JH offers a wide range of peripherals including CAN-FD, Peripheral Touch Control with Driven Shield Plus (PTC), Advanced Timer/Counters and SERCOM (USART, SPI, I2C and LIN). Supported by MPLAB X IDE, and MPLAB® Harmony.

PIC32CM5164JH01064-I/PT product parameters:

processor:

Arm® Cortex®-M0+

48 MHz (2.46 CoreMark/MHz)

Single-Cycle Hardware Multiplier

Nested Vectored Interrupt Controller (NVIC)

Memory Protection Unit (MPU)

Working voltage range:

2.7-5.5V

memory:

Up to 512 KB Flash

Up to 64KB of SRAM

8 KB read-while-write (RWW) section of data flash memory

system:

12-channel direct memory access controller (DMAC)

12-channel event system

16 external interrupts (hardware debounce) + 1 non-maskable interrupt

Hardware divide and square root accelerator (DIVAS)

Position decoder (PDEC) operating in quadrature, Hall, or counter mode

Security:

Configurable-sized immutable boot section in flash memory for secure boot

ECC with Fault Injection for Flash, Data Flash and SRAM

CRC32 calculation in SRAM, Flash and Data Flash sections by Device Service Unit (DSU)

Memory Built-in Self-Test (MBIST) for SRAM

Integrity Check Module (ICM) for memory monitoring based on Secure Hash Algorithms (SHA1, SHA224, SHA256), DMA assistance

Clock Failure Detection

Enhanced Peripheral Touch Controller (PTC):

Driven Shield Plus is moisture and noise resistant

Up to 256 (16 x 16) mutual capacitance channels

Up to 32 self-capacitance channels with Driven Shield Plus

Support touch wake from standby sleep mode

Advanced Simulation:

Dual 12-Bit, 1 MSPS Analog-to-Digital Converter (ADC)

10-Bit, 350 KSPS Digital-to-Analog Converter (DAC)

Analog Comparator (AC) with Window Compare

Additional peripherals and communication interfaces:

Up to 2 Controller Area Network (CAN) interfaces with CAN-FD support

USART, I2C, LIN master/client, SPI, RS-485, PMBusTM, SMBusTM

16-bit and 24-bit timer counter (TCC) for control

16-bit timer counter (TC)

Watchdog Timer (WDT) with Windowed Mode

32-bit real-time counter (RTC) with clock/calendar function

Development support:

MPLAB X Integrated Development Environment

MPLAB Harmony v3 and MCC

Two-pin Serial Wire Debug (SWD) programming and debugging interface

Micro Trace Buffer (MTB) for Instruction Tracing in SRAM