Shenzhen Meiyuxin Technology Co., Ltd. [ST MCU supply] STM32F765VGT6 ARM microcontroller - MCU quality packaging new original! ! !

Product Description:

The STM32F765VGT6 devices are based on a high-performance Arm® Cortex®-M7 32-bit RISC core running at frequencies up to 216 MHz. The Cortex®-M7 core features Arm®-enabled floating-point unit (FPU) double- and single-precision data processing instructions and data types. It also implements a complete set of DSP instructions and a memory protection unit (MPU), which enhances application security.

STM32F765VGT6 devices integrate high-speed embedded memory, Flash up to 2 MB, 512 KBSRAM (including 128 KB data TCM RAM for critical real-time data), 16 KB instruction TCM RAM (for critical real-time routines) ), 4 KB of backup SRAM lowest power mode available, and a wide range of enhanced I/O and peripheral connections to two APB buses, two AHB buses, a 32-bit multi-AHB bus matrix, and a multi-support internal and Layer AXI interconnect for external memory access.

All devices provide three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers (including two PWM timers for motor control), two general-purpose 32-bit timers , a true random number generator (RNG).

They also have standard and advanced communication interfaces:

- Up to four I2C

- Six SPIs, three I2S in half-duplex mode. For audio-grade accuracy, the I2S peripheral can be clocked by a dedicated internal audio PLL or an external clock to allow synchronization

- Four USARTs plus four UARTs

- One full-speed USB OTG and one full-speed capable USB OTG Hi-Speed (with ULPI)

- Three CANs

- Two SAI serial audio interfaces

- Two SDMMC host interfaces

- Ethernet and camera interface

- LCD-TFT display controller

- Chrom-ART Accelerator

- SPDIFRX interface

- HDMI-CEC

Advanced peripherals include two SDMMC interfaces, a Flexible Memory Control (FMC) interface, a Quad-SPI flash interface, and a camera interface for CMOS sensors.

STM32F765VGT6 devices with 1.7 to 3.6 V supply. Dedicated supply inputs for USB (OTG_FS and OTG_HS) and SDMMC2 (clock, command and 4-bit data) are available in all packages except LQFP100 for more power options. The supply voltage can be reduced to 1.7 V when using an external power monitor. A comprehensive set of power-saving modes allows the design of low-power applications.