Shenzhen Meiyuxin Technology Co., Ltd【Infineon MCU Distributor】sells SAK-TC1782F-320F180HR BA 32-bit Microcontroller-MCU, TC1782 is the first member of AUDO MAX series, designed for automotive applications.

Feature description：

Package: PG-LQFP-176

CAN Nodes: 3

Program Memory: 2.5 MB

FlexRay™: yes

Type of Serial I/O Interfaces: 2xASC, 3xSSC, 1xMSC, 1xMLI

Product parameters：

High-performance 32-bit super-scalar TriCore V1.3.1 CPU with 4-stage pipeline

– Superior real-time performance

– Strong bit handling

– Fully integrated DSP capabilities

– Single precision Floating Point Unit (FPU)

– 180 MHz operation at full temperature range

• 32-bit Peripheral Control Processor with single cycle instruction (PCP2)

– 16 Kbyte Parameter Memory (PRAM)

– 32 Kbyte Code Memory (CMEM)

– 180 MHz operation at full temperature range

• Multiple on-chip memories

– 2.5 Mbyte Program Flash Memory (PFLASH) with ECC

– 128 Kbyte Data Flash Memory (DFLASH) usable for EEPROM emulation

– 128 Kbyte Data Memory (LDRAM)

– Instruction Cache: up to 16 Kbyte (ICACHE, configurable)

– 40 Kbyte Code Scratchpad Memory (SPRAM)

– Data Cache: up to 4 Kbyte (DCACHE, configurable)

– 8 Kbyte Overlay Memory (OVRAM)

– 16 Kbyte BootROM (BROM)

• 16-Channel DMA Controller

• Sophisticated interrupt system with 2 × 255 hardware priority arbitration levels serviced by CPU or PCP2

• High performing on-chip bus structure

– 64-bit Local Memory Buses between CPU, Flash and Data Memory

– 32-bit System Peripheral Bus (SPB) for on-chip peripheral and functional units

– One bus bridge (LFI Bridge)

• Versatile On-chip Peripheral Units

– Two Asynchronous/Synchronous Serial Channels (ASC) with baud rate generator, parity, framing and overrun error detection

– Three High-Speed Synchronous Serial Channels (SSC) with programmable data length and shift direction

– One serial Micro Second Bus interface (MSC) for serial port expansion to external power devices

– One High-Speed Micro Link interface (MLI) for serial inter-processor communication

– One MultiCAN Module with 3 CAN nodes and 128 free assignable message objects for high efficiency data handling via FIFO buffering and gateway data transfer (one CAN node supports TTCAN functionality)

– One FlexRayTM module with 2 channels (E-Ray).

– One General Purpose Timer Array Module (GPTA) with additional Local Timer Cell Array (LTCA2) providing a powerful set of digital signal filtering and timer functionality to realize autonomous and complex Input/Output management

• 32 analog input lines for ADC

– 2 independent kernels (ADC0 and ADC1)

– Analog supply voltage range from 3.3 V to 5 V (single supply)

• 4 different FADC input channels

– channels with impedance control and overlaid with ADC1 inputs

– Extreme fast conversion, 21 cycles of fFADC clock

– 10-bit A/D conversion (higher resolution can be achieved by averaging of consecutive conversions in digital data reduction filter)

• 86 digital general purpose I/O lines (GPIO), 4 input lines

• Digital I/O ports with 3.3 V capability

• On-chip debug support for OCDS Level 1 (CPU, PCP, DMA, On Chip Bus)

• Dedicated Emulation Device chip available (TC1782ED)

– multi-core debugging, real time tracing, and calibration

– four/five wire JTAG (IEEE 1149.1) or two wire DAP (Device Access Port) interface

• Power Management System

• Clock Generation Unit with PLL

Potential application：

Engine and transmission control

4-6 cylinder diesel or gasoline direct injection

Double clutch transmission„„

Hybrid and electric vehicle

Suspension systems