Shenzhen Meiyuxin Technology Co., Ltd. [MCU Agent] Imported Spot ATXMEGA128D3-AU 8-Bit Microcontroller MCU Quality Assurance Brand New Original! ! !

Product Description:

ATXMEGA128D3-AU The high-performance, low-power 8-/16-bit AVR® XMEGA® microcontroller combines 128 KB ISP Flash memory (8 KB boot code section) with read-while-write capabilities, 2 KB EEPROM, 8 KB SRAM, a four-channel event system, a programmable multi-level interrupt controller, 50 general purpose I/O lines, a 16-bit real-time counter, five flexible 16-bit timer/counters with compare modes and PWM, three USARTs, two Two-Wire interfaces, two serial peripheral interfaces, one 16-channel/12-bit A/D converter with optional differential input with programmable gain, two analog comparators with window mode, a programmable watchdog timer with separate internal oscillator, accurate internal oscillators with PLL and prescaler, and a programmable brown-out detection. The Program and Debug Interface (PDI), a fast 2-pin interface for programming and debugging, is available. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching one MIPS per MHz, balancing power consumption and processing speed.

ATXMEGA128D3-AUProduct Specifications:

High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller

 Nonvolatile program and data memories

 32K - 384KBytes of in-system self-programmable flash

 4K - 8KBytes boot section

 1K - 4KBytes EEPROM

 4K - 32KBytes internal SRAM

 Peripheral features

 Four-channel event system

 Five 16-bit timer/counters

 Four timer/counters with four output compare or input capture channels

 One timer/counter with two output compare or input capture channels

 High resolution extension on two timer/counters

 Advanced waveform extension (AWeX) on one timer/counter

 Three USARTs with IrDA support for one USART

 Two two-wire interfaces with dual address match (I2

C and SMBus compatible)

 Two serial peripheral interfaces (SPIs)

 CRC-16 (CRC-CCITT) and CRC-32 (IEEE®802.3) generator

 16-bit real time counter (RTC) with separate oscillator

 One sixteen-channel, 12-bit, 300ksps Analog to Digital Converter

 Two Analog Comparators with window compare function, and current sources

 External interrupts on all general purpose I/O pins

 Programmable watchdog timer with separate on-chip ultra low power oscillator

 Atmel QTouch® library support

 Capacitive touch buttons, sliders and wheels

 Special microcontroller features

 Power-on reset and programmable brown-out detection

 Internal and external clock options with PLL and prescaler

 Programmable multilevel interrupt controller

 Five sleep modes

 Programming and debug interface

 PDI (program and debug interface)

 I/O and packages

 50 programmable I/O pins

 64-lead TQFP

 64-pad QFN

 Operating voltage

 1.6 – 3.6V

 Operating frequency

 0 – 12MHz from 1.6V

 0 – 32MHz from 2.7V