The UCC23313BQDWYRQ1 is an opto-compatible single-channel isolated gate driver for IGBTs, MOSFETs, and SiC MOSFETs with 4.5-A peak source and 5.3-A peak sink current and 3.75-kVRMS basic isolation rating. The high supply voltage range of 33V allows the use of bipolar supplies to efficiently drive IGBTs and SiC power FETs. The UCC23313-Q1 can drive both low-side and high-side power FETs. Key features and features of this device significantly improve performance and reliability compared to standard optocoupler-based gate drivers, while maintaining pin-to-pin compatibility in schematic and layout designs. Performance highlights include high common-mode transient immunity (CMTI), low propagation delay, and small pulse width distortion. Tight process control results in small device-to-device skew. The input stage is an e-diode, which means better reliability and aging characteristics than conventional LEDs in optocoupler gate drivers. The device is housed in an extended SO6 package with greater than 8.5mm of creepage and clearance and a relative tracking index (CTI) of greater than 600V for the molding compound (Material Group I). The high performance and reliability of the UCC23313-Q1 make it ideal for use in automotive motor drives such as traction inverters, on-board chargers, DC charging stations, and automotive HVAC and heating systems. Higher operating temperatures open up opportunities for applications that traditional optocouplers could not support before.

Product parameters:

Product Category: Isolated Gate Drivers

RoHS: Details

Trademark: Texas Instruments

Fall time: 25 ns

Maximum working temperature: + 125 C

Minimum working temperature: - 40 C

Humidity Sensitivity: Yes

Installation style: SMD/SMT

Driver Quantity: 1 Driver

Number of outputs: 1 Output

Output current: 5A

Pacage/Case: SOIC-6

Package: Reel

Pd-power dissipation: 750 mW

Product: Isolated Gate Drivers

Product Type: Isolated Gate Drivers

Propagation Delay—Max: 105 ns

Rise time: 28 ns

Series: UCC23313-Q1

Subcategory: PMIC - Power Management ICs

Supply Voltage - Max: 30 V

Supply voltage - min: 15 V

Technology: Si

Type: High-Side, Low-Side