The DRV5033AJQDBZRQ1 device is a chopper-stabilized Hall-effect sensor that provides magnetic field sensing with excellent sensitivity stability over temperature and integrated protection features.

The DRV5033AJQDBZRQ1 responds equally to both polar directions of the magnetic field. When the applied magnetic flux density exceeds the BOP threshold, the DRV5033-Q1 open-drain output goes low. The output will remain low until the flux density drops below BRP and becomes high impedance. The output sink current capability is 30mA. Reverse polarity protection up to -22V wide operating voltage range (2.7 to 38V) makes this device suitable for a wide variety of automotive signals.

DRV5033AJQDBZRQ1 This device provides internal protection against reverse supply conditions, load dump, and output short circuit or overcurrent faults.

Product parameters:

Product Type: Board Mount Hall Effect/Magnetic Sensors

RoHS: Details

Type: Omnipolar

Working power supply current: 2.7 mA

Maximum output current: 30 mA

Operating Point Min/Max: 3 mT to 12 mT

Min/max release point (Brp): 1 mT to 5 mT

Working power supply voltage: 38 V

Minimum working temperature: - 40 C

Maximum working temperature: + 150 C

Installation style: SMD/SMT

Package / Box: SOT-23-3

Qualification: AEC-Q100

Package: Reel

Output Type: Open Drain

Output voltage: 38V

Product Type: Hall Effect / Magnetic Sensors

Series: DRV5033-Q1

Subcategory: Sensors

Supply Voltage - Max: 38 V

Supply Voltage - Min: 2.7 V

Unit weight: 45 mg