The CAT823RTDI-GT3 provides basic functions for resetting and monitoring electronic systems. Each device monitors the system voltage and maintains the reset output until that voltage reaches the device's specified trip value, then maintains the reset output active condition until the device's internal timer, a minimum timer of 140 milliseconds; allows system power to stabilize.

The CAT823RTDI-GT3 also has a watchdog input that can be used to monitor system signals and signal a reset if the signal fails to change state before the timeout condition.

The CAT823RTDI-GT3 also provides a manual reset input that can be used to initiate a reset if pulled low. This input can be connected directly to a button or a processor signal.

Product Specifications:

Product Type: Monitoring Circuits

RoHS: Details

Type: Voltage Supervisory

Installation style: SMD/SMT

Package / Box: TSOT-23-5

Threshold voltage: 2.63 V

Number of Monitored Inputs: 1 Input

Output Type: Active High, Active Low, Push-Pull

Manual reset: Manual Reset

Watchdog timer: Watchdog

Battery backup switch: No Backup

Reset delay time: 200 ms

Supply Voltage - Max: 5.5 V

Minimum working temperature: - 40 C

Maximum working temperature: + 85 C

Series: CAT823

Height: 0.87 mm

Length: 2.9 mm

Working power supply current: 4 uA

Overvoltage threshold: 2.7 V

Pd-power dissipation: 571 mW

Product Type: Supervisory Circuits

Subcategory: PMIC - Power Management ICs

Supply Voltage - Min: 1.2 V

Undervoltage threshold: 2.55 V

Width: 1.6mm

Unit weight: 6.300 mg