The TPS57160QDGQRQ1 device is a 60V 1.5A step-down regulator with an integrated high-side MOSFET. Current-mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skipping mode reduces no-load output supply current to 116µA. By using the enable pin, the shutdown supply current is reduced to 1.5μA.

Undervoltage lockout is internally set to 2.5V, but it can be raised using an enable pin. The output voltage start-up ramp is controlled by the slow-start pin, which can also be configured to control power sequencing or tracking. An open-drain power good signal indicates that the output is within 92% to 109% of its nominal voltage value.

Product Specifications:

Manufacturer: TPS57160QDGQRQ1

Product Category: Switching Regulators

RoHS: Details

Installation style: SMD/SMT

Package / Case: MSOP-PowerPad-10

Topology: Buck

Output voltage: 800 mV to 58 V

Output current: 1.5 A

Number of outputs: 1 Output

Input voltage (min): 3.5 V

Input voltage (max): 60 V

Quiescent current: 116 uA

Switching frequency: 581 kHz

Minimum operating temperature: - 40 C

Maximum operating temperature: + 125 C

Qualification: AEC-Q100

Series: TPS57160-Q1

Package: Reel

Trademark: TPS57160QDGQRQ1

Input Voltage: 3.5 V to 60 V

Moisture Sensitivity: Yes

Operating Supply Current: 116 uA

Product: Voltage Regulators

Product Type: Switching Voltage Regulators

Subcategory: PMIC - Power Management ICs

Type: Voltage Converter

Unit weight: 23.500 mg