The TPS62067QDSGRQ1 device is a high-efficiency synchronous DC/DC buck converter. The device can deliver up to 2A of output current. With an input voltage range of 2.9V to 6V, the device is ideal for power conversion targeting 5V or 3.3V system power rails. The TPS62067QDSGRQ1 operates at a fixed frequency of 3MHz and enters a power-saving mode at light load current conditions, maintaining high efficiency over the entire load current range. This power-saving mode is optimized for low output voltage ripple. For low-noise applications, the TPS62065-Q1 device can be forced into fixed-frequency PWM mode by pulling the MODE pin high. The TPS62067-Q1 provides an open-drain power normal output and has a power-saving mode, while the TPS62067A-Q1 operates in fixed-frequency PWM mode. In shutdown mode, current consumption drops to 5µA while internal circuitry discharges the output capacitor. The TPS62065-Q1, TPS62067-Q1 and TPS62067A-Q1 devices are optimized for use with tiny 1µH inductors and small 10µF output capacitors, resulting in ultra-small design size and high regulation performance.

Product parameters:

Product Category: Switching Regulator

RoHS: Details

Installation style: SMD/SMT

Package / Cabinet: WSON-8

Topology: Buck

Output voltage: Adjustable

Output current: 2 A

Number of outputs: 1 Output

Input voltage (minimum): 2.9 V

Input voltage (maximum): 6 V

Quiescent current: 1 mA

Switching frequency: 3 MHz

Minimum operating temperature: - 40 C

Maximum operating temperature: + 125 C

Qualification: AEC-Q100

Series: TPS62067-Q1

Height: 0.8mm

Input voltage: 3.6 V

Length: 2mm

Humidity Sensitivity: Yes

Operating power current: 18 uA

Products: Voltage Regulators

Product Type: Switching Voltage Regulators

Subcategory: PMIC - Power Management ICs

Supply voltage - minimum: 2.9 V

Type: Voltage Converter

Width: 2mm