Shenzhen Meiyuxin Technology Co., Ltd. 【Supply ST products】STM32MP153AAB3 Microprocessor - MPU MPU Arm Dual Cortex-A7 650 MHz, Arm Cortex-M4 Quality assurance New original! ! !

Product Description:

The STM32MP153AAB3 device is based on a high-performance dual-core Arm® Cortex®-A7 32-bit RISC core running at up to 800 MHz. Cortex-A7 processors have a 32 KB L1 instruction cache per CPU, a 32 KB L1 data cache CPU and 256 KB L2 cache per CPU. The Cortex-A7 processor is an extremely power-efficient application processor designed to provide rich performance for high-end wearable devices, as well as other low-power embedded and consumer applications. It offers up to 20% better single thread performance than Cortex-A5 and offers similar performance to CortexA9.

The STM32MP153AAB3 Cortex-A7 combines all the features of the high-performance Cortex-A15 and CortexA17 processors, including hardware virtualization support, NEON™ and 128-bit AMBA®4AXI bus interface.

The STM32MP153AAB3 device also embeds a Cortex®-M4 32-bit RISC core running at up to 209 MHz. The Cortex-M4 core has a floating point unit (FPU) single precision that supports Arm® single precision data processing instructions and data types. The Cortex®-M4 supports a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.

The STM32MP153AAB3 device provides an external SDRAM interface supporting external memory up to 8 Gbit density (1 Gbyte), 16 or 32 bit LPDDR2/LPDDR3 or DDR3/DDR3L up to 533 MHz. The STM32MP153AAB3 device integrates high-speed embedded memory, 708 KB of internal SRAM (including 256 KB of AXI SYSRAM, three banks of 128 KB each AHB SRAM, 64 KB of AHB SRAM in the backup domain and 4 KB of SRAM in the backup domain), As well as a wide range of enhanced I/O and peripherals connected to the APB bus, AHB bus, a 32-bit multi-AHB bus matrix and a 64-bit multilayer AXI interconnect supporting internal and external memory access.

All STM32MP153AAB3 devices provide two ADCs, two DACs, a low-power RTC, 12 general-purpose 16-bit timers, two PWM timers for motor control, five low-power timers, a true random Number Generator (RNG). These devices support six digital filters (DFSDM) for the external sigma delta modulator. They also have standard and advanced communication interfaces.

• Standard peripherals

– Six I2C

– Four USARTs and four UARTs

– Six SPI, three I2S full-duplex master/slave.

– Four SAI serial audio interfaces

– One SPDIF Rx interface

– Management Data Input/Output Slave (MDIOS)

– Three SDMMC interfaces

– USB Hi-Speed Host with two ports, two Hi-Speed PHYs and a USB OTG Hi-Speed and Full-Speed PHY or Hi-Speed PHY sharing the USB host with a second port.

– Two FDCAN interfaces, one of which supports TTCAN mode

– One Gigabit Ethernet interface

– HDMI-CEC

• Advanced peripherals include

– Flexible Memory Control (FMC) interface

– One Quad-SPI flash interface

– Camera interface for CMOS sensors

– LCD-TFT display controller

The STM32MP153AAB3 devices are available in 4 packages with ball counts ranging from 257 to 448 and pitches ranging from 0.5 mm to 0.8 mm. The set of peripherals included varies with device selection. These features make the STM32MP153AAA3 suitable for a wide range of consumer, industrial, white goods and medical applications.