Shenzhen Meiyuxin Technology Co., Ltd. 【Supply MCU】STM32F479IIT6 ARM Microcontroller - MCU High-performance advanced line, Arm Cortex-M4 Quality assurance New original! ! !

Product Description:

The STM32F479IIT6 device is based on a high-performance Arm®(a) Cortex®-M4 32-bit RISC core running at up to 180 MHz. The Cortex®-M4 core has a floating point unit (FPU) single precision that supports all Arm® single precision data processing instructions and data types. It also implements a complete set of DSP instructions and a Memory Protection Unit (MPU) for enhanced application security.

The STM32F479IIT6 device integrates high-speed embedded memory (flash up to 2 MB, up to 384 KB of SRAM), up to 4 KB of backup SRAM, and extensive enhanced I/O and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.

All STM32F479IIT6 devices provide three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers, one True Random Number Generator (RNG) and a Cryptographic Acceleration Unit. They also have standard and advanced communication interfaces:

 Up to three I2C

 Six SPIs, two I2S full duplex. For audio-grade accuracy, the I2S peripheral can be clocked by a dedicated internal audio PLL or by an external clock to allow synchronization.

 Four USARTs plus four UARTs

 One full-speed USB OTG and one full-speed capable USB OTG Hi-Speed (with ULPI)

 Two CANs

 One SAI serial audio interface

 SDMMC host interface

 Ethernet and camera interface

 LCD-TFT display controller

 Chrom-ART Accelerator™

 DSI Host.

The STM32F479IIT6 devices operate over a temperature range of –40 to +105 °C from a 1.7 to 3.6 volt supply. Dedicated power input for USB (OTG_FS and OTG_HS), only in full speed mode, for all packages. A comprehensive set of power-saving modes allows the design of low-power applications.

The STM32F479IIT6 devices are available in eight packages ranging from 100 to 216 pin counts. The set of peripherals included varies with the selected device. These features make the STM32F479IIT6 microcontroller suitable for a wide range of applications:

 Motor drive and application control

 Medical equipment

 Industrial applications: PLCs, inverters, circuit breakers

 Printers and scanners

 Alarm system, video intercom and HVAC

 Home audio equipment