Shenzhen Meiyuxin Technology Co., Ltd. [distributing MCU] sells STM32F429BGT6 ARM microcontroller - MCU High-performance advanced line, Arm Cortex-M4 Quality assurance New original! ! !

Product Description:

The STM32F429BGT6 device is based on the high-performance Arm® Cortex®-M4 32-bit RISC core running at up to 180 MHz. The Cortex-M4 core features floating point unit (FPU) single precision and supports all Arm® single precision data processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) to enhance application security.

The STM32F429BGT6 device integrates high-speed embedded memory (up to 2 MB Flash, up to 256 KB SRAM), up to 4 KB backup SRAM, and extensive enhanced I/O and peripheral connections to two APB buses, two AHB bus and a 32-bit multi-AHB bus matrix.

All STM32F429BGT6 devices provide three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, and two general-purpose 32-bit timers. They also have standard and advanced communication interfaces.

• Up to three I2C

• Six SPIs, two I2S full duplex. For audio-grade accuracy, the I2S peripheral can be clocked by a dedicated internal audio PLL or by an external clock to allow synchronization.

• Four USARTs plus four UARTs

• One USB OTG Full Speed and one USB OTG High Speed with Full Speed capability (with ULPI),

• Two CAN

• One SAI serial audio interface

• SDIO/MMC interface

• Ethernet and camera interface

• LCD-TFT display controller

• Chrom-ART Accelerator™.

The STM32F429BGT6 advanced peripherals include an SDIO, a Flexible Memory Control (FMC) interface, a camera interface for CMOS sensors.

The STM32F429BGT6 devices operate from a 1.7 to 3.6 V supply at temperatures from –40 to +105 °C. The supply voltage can be reduced to 1.7 V when using an external power monitor. A comprehensive set of power-saving modes allows the design of low-power applications.

The STM32F429BGT6 devices are available in 8 packages ranging from 100-pin to 216-pin. The set of included peripherals varies with the device selected. These features make the STM32F429NGH6 microcontroller suitable for a wide range of applications:

• Motor drive and application control

• medical equipment

• Industrial applications: PLCs, inverters, circuit breakers

• Printers and scanners

• Alarm system, video intercom and HVAC

• Home audio equipment