Shenzhen Meiyuxin Technology Co., Ltd. [distributing ST] sells STM32F756ZGT6 ARM microcontroller - MCU High-performance & DSP FPU, Arm Cortex-M7 MCU Quality assurance New original! ! !

Product Description:

The STM32F756ZGT6 device is based on a high-performance ARM® Cortex®-M7 32-bit RISC core running at up to 216 MHz. The Cortex®-M7 core has a single precision floating-point unit (SFPU) supporting all ARM® single-precision data processing instructions and data types. It also implements a complete set of DSP instructions and a memory protection unit (MPU) to enhance application security.

STM32F756ZGT6 devices integrate high-speed embedded memory with flash memory up to 1 MB, 320 KB of SRAM (including 64 KB of data TCM RAM for critical real-time data), 16 KB of instruction TCM RAM (for critical real-time routines), Offers 4 KB of backup SRAM in lowest power mode, and extensive connectivity to two APB buses, two AHB buses, a 32-bit multiAHB bus matrix, and an enhanced multilayer AXI interconnect supporting internal and external I/O and peripheral memory access.

All STM32F756ZGT6 devices provide three 12-bit ADCs, two DACs, a low-power RTC, thirteen general-purpose 16-bit timers, including two PWM timers for motor control and one low-power timer in stop mode, two general-purpose 32-bit timers, a true random number generator (RNG), and a crypto acceleration unit. They also have standard and advanced feature communication interfaces.

• Up to four I2C

• Six SPIs, three I2S in duplex mode. For audio-like precision, the I2S peripheral can be clocked by a dedicated internal audio PLL or external clock to allow synchronization.

• Four USARTs plus four UARTs

• One USB OTG Full Speed and one USB OTG High Speed with Full Speed capability (with ULPI),

• Two CAN

• Two SAI serial audio interfaces

• SDMMC host interface

• Ethernet and camera interface

• LCD-TFT display controller

• Chrom-ART Accelerator™

• SPDIFRX interface

• HDMI-CEC

The STM32F756ZGT6 devices operate over a temperature range of –40 to +105 °C from a 1.7 to 3.6 volt supply. Dedicated power inputs for USB (OTG_FS and OTG_HS) are available on all packages except LQFP100 to provide more power options. The supply voltage can be reduced to 1.7 V when using an external power monitor. A comprehensive set of power-saving modes allows the design of low-power applications. The STM32F756ZGT6 device is available in 8 packages ranging from 100-pin to 216-pin. The set of included peripherals varies with the device selected. These features make the STM32F756ZGT6 microcontroller suitable for a wide range of applications:

• motor drive and application control,

• medical equipment,

• Industrial applications: PLCs, inverters, circuit breakers,

• printers and scanners,

• Alarm system, video intercom and HVAC,

• Home audio equipment,

• Mobile applications, IoT,

• Wearables: smart watches