Shenzhen Meiyuxin Technology Co., Ltd. [distributing electronic chips] sells STM32MP135DAE7 Microprocessor - MPU 32-bit Arm Cortex-A7 900MHz MPU Quality Assurance Brand new and original! !

Product parameters:

The STM32MP135DAE7 device is based on a high-performance Arm® Cortex®-A7 32-bit RISC core running up to 1 GHz. The Cortex®-A7 processor includes a 32 KB L1 instruction cache, a 32 KB L1 data cache, and a 128 KB L2 cache. The Cortex®-A7 processor is a very power-efficient applications processor designed to deliver rich performance applications in high-end wearables and other low-power embedded and consumer products. It offers 20% higher single-threaded performance than Cortex®-A5 and similar performance to Cortex®-A9.

The STM32MP135DAE7 Cortex®-A7 combines all the features of the high-performance Cortex®-A15 with the Cortex®-A17 processor, including hardware virtualization support, NEON™ and 128-bit

AMBA®4 AXI bus interface.

The STM32MP135DAE7 device provides an external SDRAM interface supporting external memory up to 8 Gbit density (1 Gbyte), 16-bit LPDDR2/LPDDR3 or DDR3/DDR3L up to 533 MHz.

The STM32MP135DAE7 device integrates high-speed embedded memory, 168 KB of internal SRAM (including 128 KB of AXI SYSRAM, two 8 KB banks and a set of 16 KB secure AHB SRAM, and an 8 KB SRAM domain in backup), and a wide range of Enhanced I/O and peripheral bus connected to APB, AHB bus and a 64-bit multilayer AXI interconnect, supporting internal and external memory access.

All STM32MP135DAE7 devices offer two ADCs, a low-power secure RTC, ten general-purpose 16-bit timers, two 32-bit timers, two PWM timers for motor control, five low-power timers, A secure true random number generator (RNG). The device supports two digital filter external sigma-delta modulators (DFSDM). They also have standard and advanced feature communication interfaces.

• Standard Peripherals:

– Five I2C

– Four USARTs and four UARTs

– Five SPI, four I2S full-duplex master/slave. For audio-grade precision, the I2S peripherals can be synchronized either through a dedicated internal audio PLL or through an external clock.

– Two SAI serial audio interfaces (up to four audio channels each)

– One SPDIF Rx interface

– Two SDMMC interfaces

– USB OTG high-speed controller

– USB high-speed host controller with two ports and two high-speed physical layers. The second high-speed physical layer USB OTG High-speed can be shared between this USB high-speed host and the USB high-speed host.

– Two FDCAN interfaces

– Two Gigabit Ethernet ports

• Advanced peripherals include:

– Flexible Memory Control (FMC) interface

– One Quad-SPI flash interface

– Camera interface for CMOS sensors

– An LCD-TFT display controller including a secure layer and a non-secure layer

The STM32MP135DAE7 devices are available in three packages ranging from 289 to 320 balls with a pitch of 0.5 mm to 0.8 mm. These features make the STM32MP135A/D suitable for a wide range of consumer, industrial, white goods and medical applications.