Shenzhen Meiyuxin Technology Co., Ltd. [distributing ST MCU] STM32F479NGH6 ARM microcontroller - MCU High-performance advanced line, Arm Cortex-M4 Quality assurance Brand new original! ! !

Product Description:

The STM32F479NGH6 device is based on the high-performance Arm® Cortex®-M4 32-bit RISC core. They operate at frequencies up to 170 MHz. The Cortex-M4 core features a single-precision floating-point unit (FPU) that supports all Arm single-precision data processing instructions and all data types. It also implements a full set of DSP (Digital Signal Processing) instructions and a Memory Protection Unit (MPU) for enhanced application security. These devices embed high-speed memory (up to 512 KB of flash memory, and 128 KB of SRAM), a flexible external memory controller (FSMC) for static memory (for devices with packages of 100 pins and more) , a Quad-SPI flash memory interface, and a wide range of enhanced I/O and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.

The STM32F479NGH6 device also embeds several protection mechanisms for embedded flash and SRAM: read protection, write protection, secure memory area and proprietary code read protection. These devices embed peripherals that allow acceleration of math/arithmetic functions (CORDIC for trigonometric functions and FMAC unit for filter functions). They provide five fast 12-bit ADCs (4 Msps), seven comparators, six operational amplifiers, seven DAC channels (3 external and 4 internal), an internal voltage reference buffer, a low power RTC, two three general-purpose 32-bit timers, three dedicated to motor control, seven general-purpose 16-bit timers, and one 16-bit low-power timer. Also features standard and advanced communication interfaces such as:

- Four I2C

- Four SPIs multiplexed with two half-duplex I2S

- Three USARTs, two UARTs and one low-power UART.

- Three FDCANs

- one SAI

- USB device

STM32F479NGH6 The device operates from a 1.71 to 3.6 V supply over the -40 to +85 °C (+105 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges. A comprehensive set of power saving modes allows the design of low power applications. Several independent supplies are supported, including inputs for analog independent supplies ADCs, DACs, operational amplifiers, and comparators. VBAT input allows backup of RTC and registers. The STM32F479NGH6 series is available in 8 packages from 48-pin to 128-pin.