Shenzhen Meiyuxin Technology Co., Ltd. supplies imported original LM2902LVQDYYRQ1 industrial standard, low-voltage automotive operational amplifiers! !

Description：

The LM290xLV-Q1 family includes the dual LM2904LV-Q1 and quad LM2902LV-Q1 operational amplifiers, or op amps. The devices can operate in a supply range of 2.7 V to 5.5 V.

These op amps serves as supply an alternatives to the LM2904-Q1 and LM2902-Q1 in low-voltage applications that are sensitive to cost. The LM290xLV-Q1 devices provide better performance than the LM290x-Q1 devices at low voltage and have lower power consumption. The op amps are stable at unity gain, and do not have phase reversal in overdrive conditions. The design for ESD gives the LM290xLV-Q1 family an HBM specification of 2 kV.

LM2902LVQDYYRQ1 family is available in packages that match industry standards. The available packages include SOIC, VSSOP, and TSSOP packages.

Features：

Industry standard amplifier for cost-sensitive systems

Low input offset voltage: ±1 mV

Common-mode voltage range includes ground

Unity-gain bandwidth: 1 MHz

Low broadband noise: 40 nV/√ Hz

Low quiescent current: 90 µA/Ch

Unity-gain stable

Operational at supply voltages from 2.7 V to 5.5 V

Offered in dual- and quad-channel variants

Robust ESD specification: 2-kV HBM, 1-kV CDM

Extended operating temperature range: –40°C to 125°C

Applications：

Optimized for AEC-Q100 grade 1 applications

Infotainment and cluster

Passive safety

Body electronics and lighting

HEV/EV inverter and motor control

On-board (OBC) and wireless charger

Powertrain current sensor

Advanced driver assistance systems (ADAS)

Single-supply, low-side, unidirectional currentsensing circuit