Shenzhen Meiyuxin Technology Co., Ltd. [distributing ST MCU] brand new original STM32H7B0VBT6 32-bit Arm® Cortex®-M7 280 MHz MCU quality assurance brand new original! ! !

Product Description:

The STM32H7B0VBT6 device is based on the high-performance Arm® Cortex®-M7 32-bit RISC core running at speeds up to 280 MHz. The Cortex® -M7 core features an Arm® double precision floating point unit (FPU) (IEEE 754 compliant) and single precision data processing instructions and data types.

STM32H7B0VBT6 devices support a full set of DSP instructions and a Memory Protection Unit (MPU) to enhance application security. The STM32H7B0xB devices contain high-speed embedded memory with 128 KB of flash memory, approximately 1.4 MB of RAM (including 192 KB of TCM RAM, 1.18 MB of user SRAM, and 4 KB of backup SRAM), as well as extensive enhanced I/O and peripheral connections to four Access to the APB bus, three AHB buses, a 32-bit multi-AHB bus matrix, and a multilayer AXI interconnect supporting internal and external memory.

All STM32H7B0VBT6 devices offer two ADCs, two DACs (one dual DAC and one single DAC), two ultra-low-power comparators, a low-power RTC, 12 general-purpose 16-bit timers, two Controlled PWM timers, three low-power timers, a true random number generator (RNG), crypto acceleration unit and HASH processor. The device supports nine digital filters for an external sigma delta modulator (DFSDM). They also feature standard and advanced communication interfaces.

• Standard peripherals

– Four I2C

– Five USARTs, five UARTs, and one LPUART

– Six SPIs, four I2S in full-duplex mode. For audio-grade accuracy, the I2S peripheral can be clocked by a dedicated internal audio PLL or an external clock for synchronization.

– Two SAI serial audio interfaces, one with PDM

– One SPDIFRX interface

– One Single Wire Protocol Master Interface (SWPMI)

– A 16-bit Parallel Synchronous Slave Interface (PSSI) shares the same interface as the digital camera)

– Management data input/output (MDIO) slave

– Two SDMMC interfaces (one of which can be powered by a supply voltage separate from that of all other I/Os)

– Hi-Speed USB OTG with full speed capability (with ULPI)

– One FDCAN plus one TT-CAN interface

– Chrom-ART Accelerator

– HDMI-CEC

• Advanced peripherals include

– Flexible Memory Control (FMC) interface

– Two octo-SPI memory interfaces with on-the-fly decryption (OTFDEC)

– Digital camera interface for CMOS sensors (DCMI)

– Graphics Memory Management Unit (GFXMMU)

– LCD-TFT Display Controller (LTDC)

– JPEG hardware compressor/decompressor

The STM32H7B0VBT6 devices operate in an ambient temperature range of –40 to +85 °C with a supply voltage of 1.62 to 3.6 V supply. The supply voltage can be reduced to 1.62 V by using an external power monitor and connecting the PDR_ON pin to VSS. Otherwise the supply voltage must be kept above 1.71 V with the embedded supply voltage detector enabled. The USB OTG_HS/FS interface can be fed by the integrated USB regulator or via a separate supply. A dedicated power input is available for one of the SDMMC interfaces for packages with more than 100 pins. It allows operation from a different voltage level than all other I/Os. A comprehensive set of power-saving modes allows the design of low-power applications. CPU and domain status can be directly monitored on some GPIOs configured as alternate functions.

The STM32H7B0VBT6 devices are available in various packages ranging from 64 pins to 225 pins/ball. Package included peripherals vary with equipment selected. These features make the STM32H7B0xB microcontrollers suitable for a wide range of applications:

• Motor drive and application control

• medical equipment

• Industrial applications: PLCs, inverters, circuit breakers

• Printers and scanners

• Alarm system, video intercom and HVAC

• Home audio equipment

• Mobile applications, Internet of Things

• Wearables: smart watches