Shenzhen Meiyuxin Technology Co., Ltd. [Xilinx FPGA dealer] supplies ISO7330CQDWRQ1 25Mbps digital isolator, quality assurance, brand new and original price! ! !

Product Description:

The ISO7330CQDWRQ family of devices provides galvanic isolation up to 3000 VRMS for up to 1 minute per UL 1577 and 4242 VPK isolation per VDE V 0884-10. These devices feature three isolation channels with logic input and output buffers separated by silicon dioxide (SiO2) insulation barriers.

The ISO7330CQDWRQ has three non-directional channels, while the ISO7331-Q1 has two forward channels and one reverse channel. Default output level (order part number for devices with suffix ) or level (order part number for devices without suffix ) if loss of input power or signal occurs. .

When the ISO7330CQDWRQ is used with an isolated power supply, these devices help prevent noise currents on the data bus or other circuits from entering the local ground or interfering with or damaging sensitive circuits. The ISO733x-Q1 family of devices has integrated noise filters for harsh industrial environments. Under such circumstances, short noise pulses may appear on the input pins of the device. The ISO733x-Q1 family of devices has transistor-transistor logic (TTL) input thresholds and operates from a 3-V to 5.5-V voltage range. With innovative chip design and layout techniques, the electromagnetic compatibility of the ISO733x-Q1 family of devices has been significantly enhanced to ensure system-level ESD, EFT and surge protection and compliance with emissions standards.

Features:

Compliant with Automotive Application Requirements

Has the following AEC-Q100 qualified results:

Device Temperature Grade 1: -40°C to +125°C ambient operating temperature range

Device Human Body Model (HBM) Classification Level 3A

Device Charged Device Model (CDM) Classification Level C6

Signal transmission rate: 25Mbps

Input with integrated noise filter

Default output and options

Low Power Consumption: Typical ICC per Lane at 1Mbps:

ISO7330-Q1: 1mA (5V supply),

0.8mA (3.3V supply)

ISO7331-Q1: 1.4mA (5V supply),

1mA (3.3V supply)

Low Propagation Delay: 32ns Typical

(5V power supply)

Can be powered by 3.3V and 5V supplies

3.3V and 5V level translation

70kV/μs transient immunity,

Typical (5V supply)

Excellent Electromagnetic Compatibility (EMC)

System-level Electrostatic Discharge (ESD), Transient Discharge (EFT), and Surge Protection

low radiation

Wide Body Small Outline Integrated Circuit (SOIC)-16 Package

Isolation barrier life: > 25 years

Safety and Regulatory Approvals:

4242 VPK isolated part according to DIN V VDE V 0884-10 and DIN EN 61010-1)

3000 VRMS isolation for 1 minute per UL 1577

CSA Component Acceptance Notice 5A, IEC 60950-1 and IEC 61010-1 End Equipment Standards

Has passed the CQC certification in accordance with GB4943.1-2011

Application:

Optocoupler replacement products in use in:

Industrial FieldBus

ProfiBus

ModBus

DeviceNet data bus

Servo Control Interface

motor control

power supply

Battery