Shenzhen Meiyuxin Technology Co., Ltd. [NXP Distributor] Brand new original spot for sale MKE06Z128VLH4 48MHz Cortex-M0+ 5V/Robust MCU Quality assurance Support third-party platform testing! !

Product Description:

The Kinetis® KE06 MCU family delivers a next-generation solution with enhanced ESD/EMC performance for cost-sensitive, high-reliability device applications used in high electrical noise environments.

– Offers a cost-effective, entry-level 32-bit solution featuring low power and high robustness

– Provides a pin-compatibility within the Kinetis E series portfolio, as well as pin compatibility with Our 8-bit S08P family

– Includes a powerful array of analog, communication and timing, and control peripherals with varying flash memory size and pin count

Operating characteristics：

– Voltage range: 2.7 to 5.5 V

– Flash write voltage range: 2.7 to 5.5 V

– Temperature range (ambient): -40 to 105°C

• Performance

– Up to 48 MHz Arm® Cortex-M0+ core

– Single cycle 32-bit x 32-bit multiplier

– Single cycle I/O access port

• Memories and memory interfaces

– Up to 128 KB flash

– Up to 16 KB RAM

• Clocks

– Oscillator (OSC) - supports 32.768 kHz crystal or 4 MHz to 24 MHz crystal or ceramic resonator; choice of low power or high gain oscillators

– Internal clock source (ICS) - internal FLL with internal or external reference, 37.5 kHz pre-trimmed internal reference for 48 MHz system clock

– Internal 1 kHz low-power oscillator (LPO)

• System peripherals

– Power management module (PMC) with three power modes: Run, Wait, Stop

– Low-voltage detection (LVD) with reset or interrupt,selectable trip points

– Watchdog with independent clock source (WDOG)

– Programmable cyclic redundancy check module(CRC)

– Serial wire debug interface (SWD)

– Aliased SRAM bitband region (BIT-BAND)

– Bit manipulation engine (BME)

• Security and integrity modules

– 80-bit unique identification (ID) number per chip

• Human-machine interface

– Up to 71 general-purpose input/output (GPIO)

– Two 32-bit keyboard interrupt modules (KBI)

– External interrupt (IRQ)

• Analog modules

– One up to 16-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC)

– Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)

• Timers

– One 6-channel FlexTimer/PWM (FTM)

– Two 2-channel FlexTimer/PWM (FTM)

– One 2-channel periodic interrupt timer (PIT)

– One pulse width timer (PWT)

– One real-time clock (RTC)

• Communication interfaces

– Two SPI modules (SPI)

– Up to three UART modules (UART)

– Two I2C modules (I2C)

– One MSCAN module (MSCAN)

• Package options

– 80-pin LQFP

– 64-pin QFP/LQFP

– 44-pin LQFP