Shenzhen Meiyuxin Technology Co., Ltd. [IOT distributor of the Internet of Things] imported original CY8C6136BZI-F14 MCU PSOC6 150-MHz Cortex-M4 quality assurance brand new original support third-party platform testing!

Product Description:

PSoC® 6 MCU is a high-performance, ultra-low-power, and secure MCU platform purpose-built for IoT applications. The CY8C61x6/7 product line, based on the PSoC 6 MCU platform, is a combination of high-performance microcontrollers and low-power flash memory, digital programmable logic, high-performance analog-to-digital conversion, and standard communication and timing peripherals.

Feature:

32-bit Dual CPU Subsystem In PSoC 61, the Cortex M0+ is reserved for system functions and not for applications.

■ 150-MHz Arm® Cortex®-M4F (CM4) CPU with single-cycle multiply, floating point, and memory protection unit (MPU)

■ 100-MHz Cortex-M0+ (CM0+) CPU and microprocessor with single-cycle multiply

■ Core logic operating voltage is 1.1 V or 0.9 V, depending on part selection.

■ Active CPU current slope for 1.1-V core operation

❐ Cortex-M4: 40 µA/MHz

❐ Cortex-M0+: 20µA/MHz

■ Active CPU current slope for 0.9-V core operation

❐ Cortex-M4: 22 µA/MHz

❐ Cortex-M0+: 15µA/MHz

■ Two DMA controllers with 16-channel memory subsystem each

■ 1 MB application flash, 32 KB auxiliary flash (AUXflash), and 32 KB supervisory flash (SFlash); read-while-write (RWW) support. Two 8 KB flash caches, one for each CPU.

■ 288-KB SRAM with power and data retention controls

■ One Time Programmable (OTP) 1-Kb eFuse Array Low Power 1.7V to 3.6V Operation

■ Six power modes for fine-grained power management

■ Deep-sleep mode current of 7 µA with 64-KB SRAM retention

■ On-chip single-input multiple-output (SIMO) DC-DC step-down converter with <1 µA quiescent current

■ Flexible clock options for backup domains with 64 bytes of memory and real-time clock

■ 8 MHz internal main oscillator (IMO) with ±2% accuracy

■ Ultra-low power 32kHz internal low-speed oscillator (ILO)

■ On-chip crystal oscillator (16 to 35 MHz and 32 kHz)

■ Phase-locked loop (PLL) for doubling the clock frequency

■ Frequency-locked loop (FLL) for doubling the IMO frequency

■ Integer and Fractional Peripheral Clock Divider Quad SPI (QSPI)/Serial Memory Interface (SMIF)

■ Execute-in-place (XIP) from external quad SPI flash

■ Instant encryption and decryption

■ 4 KB cache for higher XIP performance at lower power consumption

■ Supports single, dual, quad, dual quad and octal interface throughput up to 640 Mbps