Shenzhen Meiyuxin Technology Co., Ltd. [Distributing Wireless Modules] sells brand new WL1801MODGBMOCR WiLink™ 8 single-band Wi-Fi® module quality assurance brand new original! ! !

Product Description:

WL1801MODGBMOCR TI certified WiLink 8 module with power-optimized design provides high data throughput and extended range, and supports Wi-Fi and coexistence (WL1835MOD only). The WL1801MODGBMOCR device is a 2.4GHz module dual antenna solution. The device is FCC, IC, ETSI/CE, and TELEC certified for access points (APs) and clients. TI provides drivers for high-level operating systems such as Linux, Android, WinCE and RTOS.

Features:

• general instructions

– Integrates Radio Frequency (RF), Power Amplifier (PA), Clock, RF Switches, Filters, Passives and Power Management Unit

– Enables rapid hardware design with TI module companion literature and reference designs

– Operating temperature: –20°C to 70°C

– Small package size: 13.3mm x 13.4mm x 2mm

– 100-pin MOC package

– Chip Antenna certified by FCC, IC, ETSI/CE and TELEC

• Wi-Fi

– WLAN baseband processor and RF transceiver supporting IEEE standards 802.11a, 802.11b, 802.11g, and 802.11n

– 2.4GHz 20MHz and 40MHz Single-Input Single-Output (SISO) and 2.4GHz 20MHz 2 x 2 Multiple-Input Multiple-Output (MIMO) for high data throughput: 80Mbps (TCP), 100Mbps (UDP)

– 2.4GHz Maximum Ratio Combining (MRC) for extended range

– Fully calibrated: no production calibration required

– 4-bit SDIO host interface support

– Wi-Fi Direct concurrent operation (multi-channel, multi-purpose)

• And BLE (WL183xMOD only)

– Supports 4.1 and CSA2

– Host Controller Interface (HCI) transfers for transfers over Universal Asynchronous Receiver Receiver (UART)

– Dedicated audio processor supporting Subband (SBC) encoding + Advanced Audio Distribution Protocol (A2DP)

– Dual mode and BLE

– Bluetopia + LE certified stack (provided by TI)

• Key advantages

– Reduce design overhead

– Differentiated use cases by configuring WiLink 8 on both poles (STA and AP) directly to other Wi-Fi devices on different RF channels (Wi-Fi network)

– Best-in-class Wi-Fi for high-performance audio and video streaming reference applications with up to 1.4x the range of a single antenna

– Provides multiple configuration methods to connect indoor devices to Wi-Fi in one step

– Lowest Wi-Fi power consumption (< 800µA) when connection is idle

– Configurable wake-up on WLAN filter to only wake the system

– Wi-Fi-Single Antenna Coexistence

Application range：

• Internet of Things

• Multimedia

• Home electronics

• Household appliances and white goods

• Industrial and home automation

• Smart Gateway and Metering

• Video conference

• Video cameras and security equipment