Shenzhen Meiyuxin Technology Co., Ltd.【Auto MCU Distributor】Sell original spot MK24FN1M0VDC12 ARM Microcontroller - MCU K60-1M! ! !

Product Description:

MK24FN1M0VDC12 The K24 product family members are optimized for cost-sensitive applications requiring low-power, USB connectivity, and up to 256 KB of embedded SRAM. These devices share the comprehensive enablement and scalability of the Kinetis family.

This product offers:

• Run power consumption down to 250 μA/MHz. Static power consumption down to 5.8 μA with full state retention and 5 μs wakeup. Lowest Static mode down to 339 nA

• USB LS/FS OTG 2.0 with embedded 3.3 V, 120 mA LDO Vreg, with USB device crystal-less operation Performance

• Up to 120 MHz ARM® Cortex®-M4 core with DSP instructions and floating point unit Memories and memory interfaces

• Up to 1 MB program flash memory and 256 KB RAM

• FlexBus external bus interface System peripherals

• Multiple low-power modes, low-leakage wake-up unit

• Memory protection unit with multi-master protection

• 16-channel DMA controller

• External watchdog monitor and software watchdog Security and integrity modules

• Hardware CRC module

• Hardware random-number generator

• Hardware encryption supporting DES, 3DES, AES, MD5, SHA-1, and SHA-256 algorithms

• 128-bit unique identification (ID) number per chip Analog modules

• Two 16-bit SAR ADCs

• Two 12-bit DACs

• Three analog comparators (CMP)

• Voltage referenceCommunication interfaces

• USB full-/low-speed On-the-Go controller

• Controller Area Network (CAN) module

• Three SPI modules

• Three I2C modules. Support for up to 1 Mbit/s

• Six UART modules

• Secure Digital Host Controller (SDHC)

• I2S module Timers

• Two 8-channel Flex-Timers (PWM/Motor control)

• Two 2-channel FlexTimers (PWM/Quad decoder)

• 32-bit PITs and 16-bit low-power timers

• Real-time clock

• Programmable delay block Clocks

• 3 to 32 MHz and 32 kHz crystal oscillator

• PLL, FLL, and multiple internal oscillators

• 48 MHz Internal Reference Clock (IRC48M) Operating Characteristics

• Voltage range: 1.71 to 3.6 V

• Flash write voltage range: 1.71 to 3.6 V

• Temperature range (ambient): –40 to 105°C