Shenzhen Meiyuxin Technology Co., Ltd. sells the original authentic STM32L412C8U6 FPU Arm Cortex-M4 MCU's ultra-low power 80 MHz and 64 KB flash MCU ! !

Description：

STM32L412C8U6 devices are ultra-low-power microcontrollers based on the high-performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 80 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision that supports all Arm® single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.

STM32L412C8U6 devices embed high-speed memories (Flash memory up to 128 Kbyte,40 Kbyte of SRAM), a Quad SPI Flash memories interface (available on all packages) and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.

STM32L412C8U6 devices embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, proprietary code readout protection and Firewall.

The devices offer two fast 12-bit ADC (5 Msps), two comparators, one operational amplifier, a low-power RTC, one general-purpose 32-bit timer, one 16-bit PWM timer dedicated to motor control, four general-purpose 16-bit timers, and two 16-bit low-power timers.

They also feature standard and advanced communication interfaces, namely three I2Cs, two SPIs, three USARTs and one Low-Power UART, one USB full-speed device crystal less.

STM32L412C8U6 operates in the -40 to +85 °C (+105 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges from a 1.71 to 3.6 V VDD power supply when using internal LDO regulator and a 1.00 to 1.32V VDD12 power supply when using external SMPS supply. A comprehensive set of power-saving modes makes possible the design of low-power applications.

Some independent power supplies are supported: analog independent supply input for ADC, OPAMP and comparator. A VBAT input makes it possible to backup the RTC and backup registers. Dedicated VDD12 power supplies can be used to bypass the internal LDO regulator when connected to an external SMPS.

The STM32L412 family offers six packages from 32 to 64-pin packages.

Features：

Ultra-low-power with FlexPowerControl

1.71 V to 3.6 V power supply

-40 °C to 85/125 °C temperature range

300 nA in VBAT mode: supply for RTC and 32x32-bit backup registers

16 nA Shutdown mode (4 wakeup pins)

32 nA Standby mode (4 wakeup pins)

245 nA Standby mode with RTC

0.7 µA Stop 2 mode, 0.95 µA with RTC

79 µA/MHz run mode (LDO Mode)

28 μA/MHz run mode (@3.3 V SMPS Mode)

Batch acquisition mode (BAM)

4 µs wakeup from Stop mode

Brown out reset (BOR)

Interconnect matrix

Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait-state execution from Flash memory, frequency up to 80 MHz, MPU, 100DMIPS and DSP instructions

Performance benchmark

1.25 DMIPS/MHz (Drystone 2.1)

273.55 CoreMark® (3.42 CoreMark/MHz @ 80 MHz)

Energy benchmark

442 ULPMark-CP®

165 ULPMark-PP®