Shenzhen Meiyuxin Technology Co., Ltd. [TI Chip Agent] TPS54240DRCR 3.5V to 42V input, 2.5A buck converter! ! !

Product Description:

TPS54240DRCR  device is a 42-V, 2.5-A, step-down regulator with an integrated high-side MOSFET. Current mode control provides simple external compensation and flexible component selection. A low-ripple, pulse skip mode reduces the no load, regulated output supply current to 138 µA. Using the enable pin, shutdown supply current is reduced to 1.3 µA, when the enable pin is low.

TPS54240DRCR  Undervoltage lockout is internally set at 2.5 V, but it can be increased using the enable pin. The output voltage startup ramp is controlled by the slow-start pin that can also be configured for sequencing and tracking. An open-drain power good signal indicates the output is within 94% to 107% of its nominal voltage.

TPS54240DRCR  A wide switching frequency range allows efficiency and optimization of external component size. Frequency foldback and thermal shutdown protects the part during an overload condition.

TPS54240DRCR  is available in 10-pin, thermally-enhanced HVSSOP and 10-pin 3-mm × 3-mm PowerPAD package.

Features：

3.5-V to 42-V Input Voltage Range

200-mΩ High-Side MOSFET

High Efficiency at Light Loads With a

Pulse Skipping Eco-Mode™

138-µA Operating Quiescent Current

1.3-µA Shutdown Current

100-kHz to 2.5-MHz Switching Frequency

Synchronizes to External Clock

Adjustable Slow Start and Sequencing

UV and OV Power Good Output

Adjustable UVLO Voltage and Hysteresis

0.8-V Internal Voltage Reference

10-Pin HVSSOP and 10-Pin 3-mm x 3-mm

VSON Packages with PowerPAD™

Supported by WEBENCH® Software Tool

Application：

12-V and 24-V Industrial and Commercial Low Power Systems 

GSM, GPRS Modules in Fleet Management eMeters, and Security Systems